manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 367

Spanning-Tree Commands

367

Syntax

•

spanning-tree mst 

instance-id

 

priority 

priority

•

no spanning-tree mst

 instance-id 

priority

•

instance-id — 

ID of the spanning -tree instance. (Range: 0 - 15)

•

priority — 

Device priority for the specified spanning-tree instance. (Range: 0 - 61440 in multiples 

of 4096)

Default Configuration

The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.

Command Mode 

Global Configuration mode.

User Guidelines

The device with the lowest priority is selected as the root of the Spanning Tree.

Example

The following example configures the Spanning Tree priority of instance 1 to 4096.

spanning-tree mst max-hops

The 

spanning-tree mst max-hops 

Global Configuration mode command configures the number of hops 

in an MST region before the BDPU is discarded and the port information is aged out. Use the 

no

 form of 

this command to return to the default configuration.

Syntax

•

spanning-tree mst max-hops

 hop-count

•

no spanning-tree mst max-hops

•

hop-count — 

Number of hops in an MST region before the BDPU is discarded .

(Range: 1 - 40)

Default Configuration

The default number of hops is 20.

Command Mode 

Global Configuration mode.

Console(config)# 

spanning-tree mst 1 priority

 4096

book.book  Page 367  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands