manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 508

508

Web Server

crypto certificate import

The 

crypto certificate import

 Global Configuration mode command imports a certificate signed by the 

Certification Authority for HTTPS.

Syntax

•

crypto certificate 

number

 import

•

number

 — Specifies the certificate number. (Range: 1 - 2)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Use this command to enter an external certificate (signed by Certification Authority) to the device. To 
end the session, enter an empty line.

•

The imported certificate must be based on a certificate request created by the 

crypto certificate 

request

 Privileged EXEC mode command.

•

If the public key found in the certificate does not match the device's SSL RSA key, the command fails.

•

This command is not saved in the device configuration; however, the certificate imported by this 
command is saved in the private configuration (which is never displayed to the user or backed up to 
another device).

book.book  Page 508  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands