manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 134

134

Clock

User Guidelines

•

Use the 

sntp broadcast client enable

 Global Configuration mode command to enable Broadcast 

clients globally.

•

Use the 

sntp anycast client enable

 Global Configuration mode command to enable Anycast clients 

globally.

Examples

The following example enables the SNTP client on Ethernet port 1/e3. 

sntp unicast client enable

The 

sntp unicast client enable

 Global Configuration mode command enables the device to use the 

Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. Use the 

no

 

form of this command to disable requesting and accepting SNTP traffic from servers.

Syntax

•

sntp unicast client enable

•

no sntp unicast client enable

Default Configuration

The SNTP Unicast client is disabled.

Command Mode

Global Configuration mode.

User Guidelines

•

Use the 

sntp server 

Global Configuration mode command to define SNTP servers.

Examples

The following example enables the device to use the Simple Network Time Protocol (SNTP) to request 
and accept SNTP traffic from servers. 

Console(config)# 

interface ethernet

 1/e3

Console(config-if)# 

sntp client enable

Console(config)# 

sntp unicast client enable

book.book  Page 134  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands