manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 69

Command Modes

69

description

Adds a description to an interface.

dot1x guest-vlan

Defines a guest VLAN.

dot1x guest-vlan enable

Enables unauthorized users on the interface to access the guest VLAN.

dot1x mac-authentication

Enables authentication based on the station’s MAC address.

dot1x max-req

Sets the maximum number of times that the device sends an EAP - 
request/identity frame to the client, before restarting the authentication 
process.

dot1x multiple-hosts

Allows multiple hosts (clients) on an 802.1x-authorized port, that has 
the 

dot1x port-control

 Interface Configuration mode command set to 

auto

. 

dot1x port-control

Enables manual control of the authorization state of the port

dot1x radius-attributes vlan

Enables user-based VLAN assignment.

dot1x re-authenticate

Enables periodic re-authentication of the client. 

dot1x single-host-violation

Configures the action to be taken, when a station whose MAC address is 
not the supplicant MAC address, attempts to access the interface.

dot1x timeout quiet-period

Sets the number of seconds that the device remains in the quiet state 
following a failed authentication exchange.

dot1x timeout re-authperiod

Sets the number of seconds between re-authentication attempts.

dot1x timeout server-timeout

Sets the time for the retransmission of packets to the authentication 
server.

dot1x timeout supp-timeout

Sets the time for the retransmission of an EAP-request frame to the 
client.

dot1x timeout tx-period

Sets the number of seconds that the device waits for a response to an 
Extensible Authentication Protocol (EAP) - request/identity frame, 
from the client, before resending the request. 

duplex

Configures the full/half duplex operation of a given ethernet interface 
when not using auto-negotiation.

flowcontrol

Configures the Flow Control on a given interface.

garp timer

Adjusts the GARP application join, leave, and leaveall GARP timer 
values.

gvrp enable (Interface)

Enables GVRP on an interface.

gvrp registration-forbid

De-registers all VLANs, and prevents dynamic VLAN registration on the 
port.

gvrp vlan-creation-forbid

Enables or disables dynamic VLAN creation. 

ip address

Sets an IP address.

ip address dhcp

Acquires an IP address on an interface from the DHCP server.

book.book  Page 69  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands