manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 432

432

System Management

Example

The following example displays system version information (only for demonstration purposes).

asset-tag

The 

asset-tag

 Global Configuration mode command specifies the asset tag of the device. To return to the 

default configuration, use the 

no

 form of the command.

Syntax

•

asset-tag 

[

unit

 

unit

] 

tag

•

no asset-tag

 [

unit

 

unit

]

•

unit — 

Specifies the number of the unit. (Range: 1 - 8)

•

tag

 — Specifies the asset tag of the device. (Range: 1 - 16 characters)

Default Configuration

No asset tag is defined.

The default unit number is that of the master unit

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Console> 

show version

SW version 1.0.0.0 

(date 23-Jul-2004 time 17:34:19)

Boot version 1.0.0.0

(date 11-Jan-2004 time 11:48:21)

HW version 1.0.0

Unit

SW version

Boot version

HW version

----

----------

------------

----------

1

1.0.0.0

2.178

1.0.0

2

1.0.0.0

2.178

1.0.0

book.book  Page 432  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands