manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 522

522

802.1x Commands

Examples

The following example sets the number of times that the device sends an EAP-request/identity frame to 6 .

dot1x timeout supp-timeout

The 

dot1x timeout supp-timeout 

Interface Configuration mode command sets the time for the 

retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. Use the 

no

 

form of this command to return to the default configuration.

Syntax

•

dot1x timeout supp-timeout

 

seconds

 

•

no dot1x timeout supp-timeout

•

seconds — 

Time in seconds that the device waits for a response to an EAP-request frame from the 

client before resending the request. (Range: 1- 65535 seconds)

Default Configuration

Default timeout period is 30 seconds.

Command Mode 

Interface configuration (Ethernet) mode.

User Guidelines 

The default value of this command should be changed only to adjust for unusual circumstances, such as 
unreliable links or specific behavioral problems with certain clients. and authentication servers

Examples

The following example sets the timeout period before retransmitting an EAP-request frame to the client 
to 3600 seconds.

dot1x timeout server-timeout

The 

dot1x timeout server-timeout

 Interface Configuration mode command sets the time that the device 

waits for a response from the authentication server. Use the 

no

 form of this command to return to the 

default configuration.

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x max-req 

6

Console(config-if)

#

 

dot1x timeout supp-timeout 

3600

book.book  Page 522  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands