manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 39

Command Groups

39

DHCP Snooping Commands

show running-config

Displays the contents of the currently running 
configuration file.

Privileged EXEC

show startup-config

Displays the startup configuration file contents.

Privileged EXEC

show bootvar

Displays the active system image file that the device 
loads at startup.

Privileged EXEC

Command Group

Description

Access Mode

ip dhcp snooping

Globally enables DHCP snooping

Global 
Configuration

ip dhcp snooping vlan

Enables DHCP snooping on a VLAN.

Global 
Configuration

ip dhcp snooping trust

Configures a port as trusted for DHCP snooping 
purposes.

Interface 
Configuration

ip dhcp snooping 
information option 
allowed-untrusted

Configures a switch to accept DHCP packets with 
option-82 information from an untrusted port.

Global 
Configuration

ip dhcp snooping verify

Configures a switch to accept DHCP packets with 
option-82 information from an untrusted port.

Global 
Configuration

ip dhcp snooping 
database

Configures the DHCP snooping binding file.

Global 
Configuration

ip dhcp snooping 
database update-freq

Configures the update frequency of the DHCP 
snooping binding file.

Global 
Configuration

ip dhcp snooping binding

Configures the update frequency of the DHCP 
snooping binding file.

Privileged EXEC

clear ip dhcp snooping 
database

Clears the DHCP snooping binding database.

Privileged EXEC

show ip dhcp snooping

Displays the DHCP snooping configuration.

EXEC

show ip dhcp snooping 
binding

Displays the DHCP snooping binding database and 
configuration information for all interfaces on a 
switch.

User EXEC

book.book  Page 39  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands