manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 28

28

Using the CLI

To enter the Global Configuration mode, at the Privileged EXEC mode prompt enter the command 

configure

 and press <Enter>. The Global Configuration mode prompt is displayed. The Global 

Configuration mode prompt consists of the device host name followed by (config) and 

#

.

To return from the Global Configuration mode to the Privileged EXEC mode, the user can use one of 
the following commands:

•

exit

•

end

•

Ctrl+Z

The following example illustrates how to access the Global Configuration mode and return to the 
Privileged EXEC mode: 

Interface Configuration Mode and Specific Configuration Modes

Interface Configuration mode commands modify specific interface operations. The following are the 
Interface Configuration modes:

•

Line Interface

 — Contains commands to configure the management connections. These include 

commands such as line timeout settings, etc. The 

Line Commands 

Global Configuration mode is 

used to enter the Line Configuration command mode.

•

VLAN Database

 — Contains commands to create a VLAN as a whole. The 

vlan database 

Global 

Configuration mode command is used to enter the VLAN Database Interface Configuration mode.

•

Management Access List

 — Contains commands to define management access-lists. The 

management access-list 

Global Configuration mode command is used to enter the Management 

Access List Configuration mode.

•

Ethernet

 — Contains commands to manage port configuration. The 

interface ethernet

 Global 

Configuration mode command is used to enter

 

the Interface Configuration mode to configure an 

Ethernet type interface.

•

Port Channel

 — Contains commands to configure port-channels, for example, assigning ports to a 

port-channel. Most of these commands are the same as the commands in the Ethernet interface mode, 
and are used to manage the member ports as a single entity. The 

interface port-channel 

Global 

Configuration mode command is used to enter the Port Channel Interface Configuration mode.

Console(config)#

Console#

Console# 

configure

Console(config)# 

exit

Console#

book.book  Page 28  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands