manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 533

802.1x Commands

533

dot1x guest-vlan

The 

dot1x guest-vlan

 Interface Configuration mode command defines a guest VLAN. Use the 

no

 form 

of this command to return to the default configuration.

Syntax

•

dot1x guest-vlan 

•

no dot1x guest-vlan

Default Configuration

No VLAN is defined as a guest VLAN.

Command Mode

Interface Configuration (VLAN) mode.

User Guidelines

•

Use the 

dot1x guest-vlan enable

 Interface Configuration mode command to enable unauthorized 

users on an interface to access the guest VLAN.

•

If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port 
is unauthorized and leaves it when the port becomes authorized.

Example

The following example defines VLAN 2 as a guest VLAN.

Console#

Console# 

configure

Console(config)# 

vlan database

Console(config-vlan)# 

vlan 

2

Console(config-vlan)# 

exit

Console(config)# 

interface vlan

 2

Console(config-if)# 

dot1x guest-vlan

book.book  Page 533  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands