manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 458

458

Tunnel

tunnel isatap robustness

The 

tunnel isatap robustness

 Global Configuration 

mode 

command configures the number of DNS 

Query/Router Solicitation refresh messages that the device sends. Use the 

no

 form of this command to 

return to default.

Syntax

•

tunnel isatap robustness

 

number

•

no tunnel isatap robustness

•

number

 — Specify the number of refresh messages. (Range: 1 – 20)

Default Configuration

3 times.

Command Mode

Global Configuration mode.

User Guidelines

•

The DNS query interval (after the IP address of the ISATAP router is known) is the TTL that is 
received from the DNS divided by (Robu 1).

•

The router solicitation interval (when there is an active ISATAP router) is the minimum-router-
lifetime that is received from the ISATAP router divided by (Robu 1).

Example

The following example configures the number of DNS Query/Router Solicitation refresh messages that 
the device sends to 6 times.

show ipv6 tunnel

The 

show ipv6 tunnel

 

Privileged EXEC mode 

command displays information on the ISATAP tunnel.

Syntax

•

show ipv6 tunnel

Default Configuration

This command has no default setting.

Console (config)# 

tunnel isatap robustness

 6

book.book  Page 458  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands