manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 245

Management ACL

245

Management ACL

management access-list

The 

management access-list 

Global

 

Configuration mode command configures a management 

access list and enters the Management Access-list Configuration command mode. Use the 

no

 form 

of this command to delete an access list. 

Syntax

•

management access-list

 

name

•

no management access-list

 

name

•

name

 — Access list name. (Range: 1-32 characters)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

Use this command to configure a management access list. The command enters the Access-list 
Configuration mode, where permit and deny access rules are defined using the 

permit 

(Management)

 and 

deny (Management)

 commands.

•

If no match criteria are defined, the default is deny.

•

If you re-enter an access list context, the new rules are entered at the end of the access list.

•

Use the 

management access-class

 command to select the active access list.

•

The active management list cannot be updated or removed.

•

Management ACL requires a valid management interface, which is a port, VLAN, or port channel 
with an IP address or console interface. Management ACL only restricts access to the device for 
management configuration or viewing.

book.book  Page 245  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands