manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 135

Clock

135

sntp unicast client poll

The 

sntp unicast client poll 

Global Configuration mode command enables polling for the Simple 

Network Time Protocol (SNTP) predefined Unicast servers. Use the 

no

 form of this command to disable 

the polling for SNTP client.

Syntax

•

sntp unicast client poll

•

no sntp unicast client poll

Default Configuration

Polling is disabled.

Command Mode

Global Configuration mode.

User Guidelines

•

Polling time is determined by the 

sntp client poll timer

 Global Configuration mode command.

Examples

The following example enables polling for Simple Network Time Protocol (SNTP) predefined 
Unicast clients. 

sntp server

The 

sntp server

 Global Configuration mode command configures the device to use the Simple Network 

Time Protocol (SNTP) to request and accept SNTP traffic from a specified server. Use the 

no

 form of 

this command to remove a server from the list of SNTP servers.

Console(config)# 

sntp unicast client poll

book.book  Page 135  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands