manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 316

316

RADIUS Commands

radius-server deadtime

The 

radius-server deadtime

 Global Configuration mode command improves RADIUS response time 

when servers are unavailable. The command is used to cause the unavailable servers to be skipped. Use 
the 

no

 form of this command to return to the default configuration.

Syntax

•

radius-server deadtime

 

deadtime

•

no radius-server deadtime

•

deadtime

 — Length of time in minutes during which a RADIUS server is skipped over by 

transaction requests. (Range: 0 - 2000)

Default Configuration

The deadtime setting is 0.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example sets the deadtime to 10 minutes.

show radius-servers

The 

show radius-servers

 Privileged EXEC mode command displays the RADIUS server settings.

Syntax

•

show radius-servers

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode.

Console(config)# 

radius-server deadtime

 10

book.book  Page 316  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands