Dell PowerConnect 3500 Series Cli Reference Manual Download Page 75

Page: 75 / 538

Command Modes

show dot1x advanced

Displays 802.1x enhanced features for the device or for the specified
interface.

show dot1x statistics

Displays 802.1x statistics for the specified interface.

show dot1x users

Displays 802.1x users for the device.

show history

Lists the commands entered in the current session.

show hosts

Displays the default domain name, a list of name server hosts, the static
and the cached list of host names and addresses.

show interfaces access-lists

Displays access lists applied on interfaces.

show interfaces advertise

Displays autonegotiation advertisement data.

show interfaces configuration

Displays the configuration for all interfaces.

show interfaces counters

Displays traffic seen by the physical interface.

show interfaces description

Displays the description for all interfaces.

interface port-channel

Displays Port-channel information.

show interfaces status

Displays the status for all interfaces.

show interfaces switchport

Displays switchport configuration.

show ip http

Displays the HTTP server configuration.

show ip https

Displays the HTTPS server configuration.

show ip interface

Displays the usability status of interfaces configured for IP.

show ip ssh

Displays the SSH server configuration.

show logging

Displays the state of logging and the syslog messages stored in the
internal buffer.

show logging file

Displays the state of logging and the syslog messages stored in the
logging file.

show management access-class Displays the active management access-list.

show management access-list

Displays management access-lists.

show passwords configuration

Displays information about password management.

show ports security

Displays the port-lock status.

show ports security addresses

Displays current dynamic addresses in locked ports.

show ports storm-control

Displays the storm control configuration.

show radius-servers

Displays the RADIUS server settings.

show running-config

Displays the contents of the currently running configuration file.

show snmp

Displays the SNMP status.

show snmp engineid

Displays the local SNMP EngineID.

book.book Page 75 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands