manualshive.com logo in svg

Dell PowerConnect 3500 Series, Cli Reference Manual

Share
Download
Dell PowerConnect 3500 Series Cli Reference Manual Download Page 408

408

Syslog Commands

•

file-system logging delete-rename

•

no file-system logging delete-rename

•

copy 

— Indicates logging messages related to file copy operations.

•

delete-rename 

— Indicates logging messages related to file deletion and renaming operations.

Default Configuration

Logging file system events is enabled.

Command Mode

Global Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example enables logging messages related to file copy operations.

management logging

The 

management logging 

global configuration command enables logging management access list (ACL) 

events in the syslog. Use the 

no

 form of this command to disable logging management access list events.

Syntax

•

management logging deny

•

no management logging deny

•

deny 

— Indicates logging messages related to deny actions of management ACLs.

Default Configuration

Logging management ACL events is enabled.

Command Mode

Global Configuration mode.

User Guidelines

Other types of management ACL events are not subject to this command.

Console(config)# 

file-system logging copy

book.book  Page 408  Thursday, December 18, 2008  7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands