Dell PowerConnect 3500 Series Cli Reference Manual Download Page 336

Page: 336 / 538

336

SNMP Commands

User Guidelines

•

The

view-name

parameter cannot be specified for

, which has access to the whole MIB.

•

The

view-name

parameter can be used to restrict the access rights of a community string. When it is

specified:

–

An internal security name is generated.

–

The internal security name for SNMPv1 and SNMPv2 security models is mapped to an internal
group name.

–

The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view-name
(read-view and notify-view always, and for

for write-view also)

•

The

group-name

parameter can also be used to restrict the access rights of a community string. When

it is specified:

–

An internal security name is generated.

–

The internal security name for SNMPv1 and SNMPv2 security models is mapped to the group name.

•

The

no snmp-server community

command is used to remove a community or a community group.

Examples

The following example defines community access string

public

to permit administrative access to SNMP

protocol at an administrative station with IP address 192.168.1.20.

snmp-server view

The

snmp-server view

Global Configuration mode command creates or updates a Simple Network

Management Protocol (SNMP) server view entry. Use the

form of this command to remove a

specified SNMP server view entry.

Console(config)#

snmp-server community

public

192.168.1.20

book.book Page 336 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands