Dell PowerConnect 3500 Series Cli Reference Manual Download Page 301

Page: 301 / 538

QoS Commands

301

Example

The following example configures the number of expedite queues as 0.

traffic-shape

The

traffic-shape

Interface Configuration (Ethernet, Port-Channel) mode command sets the shaper on

an egress port. Use the

form of this command to disable the shaper.

Syntax

•

traffic-shape

committed-rate

•

no traffic-shape

•

committed-rate

— Specifies the average traffic rate (CIR) in kbps. (Range: 64kbps - 1G)

Default Configuration

The default configuration is disabled.

Command Mode

Interface Configuration (Ethernet, Port-Channel) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example sets the shaper on Ethernet port 1/e15 to 64kpbs committed rate.

rate-limit (Ethernet)

The

rate-limit

Interface Configuration (Ethernet) mode command limits the rate of the incoming

traffic. Use the

form of this command to disable the rate limit.

Syntax

•

rate-limit

rate

•

rate-limit

•

rate

— Specifies the maximum of kilobits per second of ingress traffic on a port. (Range: 62 – 1000000)

Console(config)#

priority-queue out num-of-queues

console(config)#

interface ethernet

1/e15

console(config-if)

traffic-shape 64

book.book Page 301 Thursday, December 18, 2008 7:40 PM

Summary of Contents for PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands

Dell PowerConnect 3500 Series, Cli Reference Manual

Search results

Summary of Contents for PowerConnect 3500 Series

Reviews:

Brands by name

Popular brands