18-02 Maintenance Log: Time
Array [10]
Range:
Function:
0 s
*
[0 - 2147483647 s] Shows when the logged event
occurred. Time is measured in s since
last power-up.
18-03 Maintenance Log: Date and Time
Array [10]
Range:
Function:
Size
related
*
[ 0 -
0 ]
Shows when the logged event occurred.
NOTICE
This requires that the date and time is
programmed in
.
Date format depends on the setting in
parameter 0-71 Date Format
, while the time
format depends on the setting in
parameter 0-72 Time Format
.
NOTICE
The frequency converter has no back-
up of the clock function. The set date/
time resets to default (2000-01-01
00:00) after a power-down unless a
real-time clock module with back-up
is installed. In
, it is possible to program a
warning in case the clock has not
been set properly, for example after a
power-down. Incorrect setting of the
clock affects the time stamps for the
maintenance events.
NOTICE
When mounting a VLT
®
Analog I/O MCB 109 option card,
a battery back-up of date and time is included.
18-27 Safe Opt. Est. Speed
Range:
Function:
0 RPM
*
[-30000 - 30000
RPM]
Shows the speed that the frequency
converter estimates and sends to
VLT
®
Safety Option MCB 15X.
18-28 Safe Opt. Meas. Speed
Range:
Function:
0 RPM
*
[-30000 - 30000
RPM]
Shows the speed measured by
VLT
®
Safety Option MCB 15X.
18-29 Safe Opt. Speed Error
Range:
Function:
0 RPM
*
[-30000 - 30000
RPM]
Shows the difference between the
speed measured by VLT
®
Safety
Option MCB 15X and the speed
estimated by frequency converter.
18-36 Analog Input X48/2 [mA]
Range:
Function:
0
*
[-20 - 20 ] View the actual current measured at input X48/2.
18-37 Temp. Input X48/4
Range:
Function:
0
*
[-500 -
500 ]
View the actual temperature measured at input
X48/4. The temperature unit is based on the
selection in
18-38 Temp. Input X48/7
Range:
Function:
0
*
[-500 -
500 ]
View the actual temperature measured at input
X48/7. The temperature unit is based on the
selection in
18-39 Temp. Input X48/10
Range:
Function:
0
*
[-500 -
500 ]
View the actual temperature measured at input
X48/10. The temperature unit is based on the
selection in
3.18.2 18-4* PGIO Data Readouts
Parameters for configuring the readout of VLT
®
Programmable I/O MCB 115.
18-43 Analog Out X49/7
Range:
Function:
0
*
[0 - 30 ] Shows the actual value at output of terminal
X49/7 in V or mA. The value reflects the selection
in
parameter 36-40 Terminal X49/7 Analogue
.
18-44 Analog Out X49/9
Range:
Function:
0
*
[0 - 30 ] Shows the actual value at output of terminal
X49/9 in V or mA. The value reflects the selection
in
parameter 36-50 Terminal X49/9 Analogue
.
Parameter Descriptions
Programming Guide
MG33MP02
Danfoss A/S © 10/2018 All rights reserved.
225
3
3
Summary of Contents for VLT AutomationDrive FC 302
Page 2: ......