Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 309 / 346

12-99 Media Counters 0 N/A All set-ups TRUE 0 Uint32
5.3.13 13-** Smart Logic
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
13-0* SLC Settings
13-00 SL Controller Mode ExpressionLimit 2 set-ups TRUE - Uint8
13-01 Start Event ExpressionLimit 2 set-ups TRUE - Uint8
13-02 Stop Event ExpressionLimit 2 set-ups TRUE - Uint8
13-03 Reset SLC [0] Do not reset SLC All set-ups TRUE - Uint8
13-1* Comparators
13-10 Comparator Operand ExpressionLimit 2 set-ups TRUE - Uint8
13-11 Comparator Operator ExpressionLimit 2 set-ups TRUE - Uint8
13-12 Comparator Value ExpressionLimit 2 set-ups TRUE -3 Int32
13-1* RS Flip Flops
13-15 RS-FF Operand S ExpressionLimit 2 set-ups TRUE - Uint8
13-16 RS-FF Operand R ExpressionLimit 2 set-ups TRUE - Uint8
13-2* Timers
13-20 SL Controller Timer ExpressionLimit 1 set-up TRUE -3 TimD
13-4* Logic Rules
13-40 Logic Rule Boolean 1 ExpressionLimit 2 set-ups TRUE - Uint8
13-41 Logic Rule Operator 1 ExpressionLimit 2 set-ups TRUE - Uint8
13-42 Logic Rule Boolean 2 ExpressionLimit 2 set-ups TRUE - Uint8
13-43 Logic Rule Operator 2 ExpressionLimit 2 set-ups TRUE - Uint8
13-44 Logic Rule Boolean 3 ExpressionLimit 2 set-ups TRUE - Uint8
13-5* States
13-51 SL Controller Event ExpressionLimit 2 set-ups TRUE - Uint8
13-52 SL Controller Action ExpressionLimit 2 set-ups TRUE - Uint8
13-9* User Defined Alerts
13-90 Alert Trigger [0] False 2 set-ups TRUE - Uint8
13-91 Alert Action [0] Info 2 set-ups TRUE - Uint8
13-92 Alert Text ExpressionLimit 2 set-ups TRUE 0
VisStr[
20]
13-9* User Defined Readouts
13-97 Alert Alarm Word 0 N/A All set-ups FALSE 0 Uint32
13-98 Alert Warning Word 0 N/A All set-ups FALSE 0 Uint32
13-99 Alert Status Word 0 N/A All set-ups FALSE 0 Uint32
5.3.14 14-** Special Functions
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
14-0* Inverter Switching
14-00 Switching Pattern [1] SFAVM All set-ups TRUE - Uint8
14-01 Switching Frequency ExpressionLimit All set-ups TRUE - Uint8
14-03 Overmodulation ExpressionLimit All set-ups FALSE - Uint8
14-04 Acoustic Noise Reduction [0] Off All set-ups TRUE - Uint8
14-06 Dead Time Compensation [1] On All set-ups TRUE - Uint8
14-1* Mains Failure
14-10 Mains Failure [0] No function All set-ups TRUE - Uint8
14-11 Mains Fault Voltage Level ExpressionLimit All set-ups TRUE 0 Uint16
14-12 Response to Mains Imbalance [0] Trip All set-ups TRUE - Uint8
Parameter Lists Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 307
5 5