13-52 SL Controller Action
Option:
Function:
If the active preset reference is changed, it
merges with other preset reference
commands coming from either the digital
inputs or via a fieldbus.
[16]
Select preset
ref 6
Selects preset reference 6.
If the active preset reference is changed, it
merges with other preset reference
commands coming from either the digital
inputs or via a fieldbus.
[17]
Select preset
ref 7
Selects preset reference 7.
If the active preset reference is changed, it
merges with other preset reference
commands coming from either the digital
inputs or via a fieldbus.
[18]
Select ramp 1 Selects ramp 1.
[19]
Select ramp 2 Selects ramp 2.
[20]
Select ramp 3 Selects ramp 3.
[21]
Select ramp 4 Selects ramp 4.
[22]
Run
Issues a start command to the frequency
converter.
[23]
Run reverse
Issues a start reverse command to the
frequency converter.
[24]
Stop
Issues a stop command to the frequency
converter.
[25]
Qstop
Issues a quick stop command to the
frequency converter.
[26]
Dcstop
Issues a DC stop command to the
frequency converter.
[27]
Coast
The frequency converter coasts
immediately. All stop commands including
the coast command stop the SLC.
[28]
Freeze output Freezes the output frequency of the
frequency converter.
[29]
Start timer 0
Starts timer 0, see
parameter 13-20 SL
Controller Timer
for further description.
[30]
Start timer 1
Starts timer 1, see
parameter 13-20 SL
Controller Timer
for further description.
[31]
Start timer 2
Starts timer 2, see
parameter 13-20 SL
Controller Timer
for further description.
[32]
Set digital out
A low
Any output with smart logic output A is
low.
[33]
Set digital out
B low
Any output with smart logic output B is
low.
[34]
Set digital out
C low
Any output with smart logic output C is
low.
[35]
Set digital out
D low
Any output with smart logic output D is
low.
13-52 SL Controller Action
Option:
Function:
[36]
Set digital out
E low
Any output with smart logic output E is
low.
[37]
Set digital out
F low
Any output with smart logic output F is
low.
[38]
Set digital out
A high
Any output with smart logic output A is
high.
[39]
Set digital out
B high
Any output with smart logic output B is
high.
[40]
Set digital out
C high
Any output with smart logic output C is
high.
[41]
Set digital out
D high
Any output with smart logic output D is
high.
[42]
Set digital out
E high
Any output with smart logic output E is
high.
[43]
Set digital out
F high
Any output with smart logic output F is
high.
[60]
Reset Counter
A
Resets counter A to 0.
[61]
Reset Counter
B
Resets counter B to 0.
[70]
Start timer 3
Starts timer 3, see
parameter 13-20 SL
Controller Timer
for further description.
[71]
Start timer 4
Starts timer 4, see
parameter 13-20 SL
Controller Timer
for further description.
[72]
Start timer 5
Starts timer 5, see
parameter 13-20 SL
Controller Timer
for further description.
[73]
Start timer 6
Starts timer 6, see
parameter 13-20 SL
Controller Timer
for further description.
[74]
Start timer 7
Starts timer 7, see
parameter 13-20 SL
Controller Timer
for further description.
[120] Start Homing
NOTICE
This option is available only with
software version 48.20 and newer.
Activates the homing mode and starts the
homing function selected in
parameter 17-80 Homing Function
. Must
remain active until the homing is
completed otherwise the homing is
aborted.
[121] Stop Homing
NOTICE
This option is available only with
software version 48.20 and newer.
Deactivates the homing mode, an active
homing function is aborted if the homing
is not completed.
Parameter Descriptions
Programming Guide
MG33MP02
Danfoss A/S © 10/2018 All rights reserved.
187
3
3
Summary of Contents for VLT AutomationDrive FC 302
Page 2: ......