Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 187 / 346

13-51 SL Controller Event
Option: Function:
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key [OK] is pressed. Only available on the
graphical LCP.
[44] Reset key [Reset] is pressed. Only available on
the graphical LCP.
[45] Left key
[
◄
] is pressed. Only available on the
graphical LCP.
[46] Right key [
►
] is pressed. Only available on the
graphical LCP.
[47] Up key
[
▲
] is pressed. Only available on the
graphical LCP.
[48] Down key
[
▼
] is pressed. Only available on the
graphical LCP.
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[75] Start command
given
[76] Digital input x30/2
[77] Digital input x30/3
[78] Digital input x30/4
[79] Digital input x46/1
[80] Digital input x46/3
[81] Digital input x46/5
[82] Digital input x46/7
[83] Digital input x46/9
[84] Digital input
x46/11
[85] Digital input
x46/13
[90] ATEX ETR cur.
warning Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If alarm 164,
ATEX ETR cur.lim.alarm is active, the
output is 1.
13-51 SL Controller Event
Option: Function:
[91] ATEX ETR cur.
alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR ]. If alarm
166, ATEX ETR freq.lim.alarm is active,
the output is 1.
[92] ATEX ETR freq.
warning Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If alarm 163,
ATEX ETR cur.lim.warning is active, the
output is 1.
[93] ATEX ETR freq.
alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If warning
165, ATEX ETR freq.lim.warning is active,
the output is 1.
[94] RS Flipflop 0 See chapter 3.13.2 13-1* Comparators .
[95] RS Flipflop 1 See chapter 3.13.2 13-1* Comparators .
[96] RS Flipflop 2 See chapter 3.13.2 13-1* Comparators .
[97] RS Flipflop 3 See chapter 3.13.2 13-1* Comparators .
[98] RS Flipflop 4 See chapter 3.13.2 13-1* Comparators .
[99] RS Flipflop 5 See chapter 3.13.2 13-1* Comparators .
[100] RS Flipflop 6 See chapter 3.13.2 13-1* Comparators .
[101] RS Flipflop 7 See chapter 3.13.2 13-1* Comparators .
[102] Relay 1
[103] Relay 2
[104] Relay 3
X47/VLT
®
Extended Relay Card MCB
113.
[105] Relay 4
X47/VLT
®
Extended Relay Card MCB
113.
[106] Relay 5
X47/VLT
®
Extended Relay Card MCB
113.
[107] Relay 6
X47/VLT
®
Extended Relay Card MCB
113.
[108] Relay 7
X34/VLT
®
Relay Card MCB 105.
[109] Relay 8
X34/VLT
®
Relay Card MCB 105.
[110] Relay 9
X34/VLT
®
Relay Card MCB 105.
[222] Homing Ok
NOTICE
This option is available only with
software version 48.20 and
newer.
Homing is completed with the
selected homing function
(
parameter 17-80 Homing Function ).
Parameter Descriptions Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 185
3 3