Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 298 / 346

2-06 Parking Current 50 % All set-ups TRUE 0 Uint16
2-07 Parking Time 3 s All set-ups TRUE -1 Uint16
2-1* Brake Energy Funct.
2-10 Brake Function ExpressionLimit All set-ups TRUE - Uint8
2-11 Brake Resistor (ohm) ExpressionLimit All set-ups TRUE 0 Uint16
2-12 Brake Power Limit (kW) ExpressionLimit All set-ups TRUE 0 Uint32
2-13 Brake Power Monitoring [0] Off All set-ups TRUE - Uint8
2-15 Brake Check [0] Off All set-ups TRUE - Uint8
2-16 AC brake Max. Current 100 % All set-ups TRUE -1 Uint32
2-17 Over-voltage Control [0] Disabled All set-ups TRUE - Uint8
2-18 Brake Check Condition [0] At Power Up All set-ups TRUE - Uint8
2-19 Over-voltage Gain 100 % All set-ups TRUE 0 Uint16
2-2* Mechanical Brake
2-20 Release Brake Current ImaxVLT (P1637) All set-ups TRUE -2 Uint32
2-21 Activate Brake Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
2-22 Activate Brake Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
2-23 Activate Brake Delay 0 s All set-ups TRUE -1 Uint8
2-24 Stop Delay 0 s All set-ups TRUE -1 Uint8
2-25 Brake Release Time 0.20 s All set-ups TRUE -2 Uint16
2-26 Torque Ref 0 % All set-ups TRUE -2 Int16
2-27 Torque Ramp Up Time 0.2 s All set-ups TRUE -1 Uint8
2-28 Gain Boost Factor 1 N/A All set-ups TRUE -2 Uint16
2-29 Torque Ramp Down Time 0 s All set-ups TRUE -1 Uint8
2-3* Adv. Mech Brake
2-30 Position P Start Proportional Gain 0.0500 N/A All set-ups TRUE -4 Uint32
2-31 Speed PID Start Proportional Gain 0.0500 N/A All set-ups TRUE -4 Uint32
2-32 Speed PID Start Integral Time 20.0 ms All set-ups TRUE -4 Uint32
2-33 Speed PID Start Lowpass Filter Time 2.0 ms All set-ups TRUE -4 Uint16
2-34 Zero Speed Position P Proportional Gain 0.0000 N/A All set-ups TRUE -4 Uint32
5.3.4 3-** Reference / Ramps
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
3-0* Reference Limits
3-00 Reference Range ExpressionLimit All set-ups TRUE - Uint8
3-01 Reference/Feedback Unit ExpressionLimit All set-ups TRUE - Uint8
3-02 Minimum Reference ExpressionLimit All set-ups TRUE -3 Int32
3-03 Maximum Reference ExpressionLimit All set-ups TRUE -3 Int32
3-04 Reference Function [0] Sum All set-ups TRUE - Uint8
3-05 On Reference Window ExpressionLimit All set-ups TRUE -3 Int32
3-06 Minimum Position
-100000 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-07 Maximum Position
100000 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-08 On Target Window 5 CustomReadoutUnit2 All set-ups TRUE 0 Int32
3-09 On Target Time 1 ms All set-ups TRUE -3 Uint16
3-1* References
3-10 Preset Reference 0 % All set-ups TRUE -2 Int16
3-11 Jog Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
3-12 Catch up/slow Down Value 0 % All set-ups TRUE -2 Int16
3-13 Reference Site [0] Linked to Hand / Auto All set-ups TRUE - Uint8
3-14 Preset Relative Reference 0 % All set-ups TRUE -2 Int32
3-15 Reference Resource 1 ExpressionLimit All set-ups TRUE - Uint8
3-16 Reference Resource 2 ExpressionLimit All set-ups TRUE - Uint8
Parameter Lists
VLT
®
AutomationDrive FC 301/302
296 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
5 5