Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 171 / 346

13-02 Stop Event
Select the boolean (true or false) input to deactivate smart logic
control.
Option: Function:
[48] Down key
[
▼
] is pressed. Only available on
the graphical LCP.
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3 Smart logic controller timer 3 is
timed out.
[71] SL Time-out 4 Smart logic controller timer 4 is
timed out.
[72] SL Time-out 5 Smart logic controller timer 5 is
timed out.
[73] SL Time-out 6 Smart logic controller timer 6 is
timed out.
[74] SL Time-out 7 Smart logic controller timer 7 is
timed out.
[75] Start command given
[76] Digital input x30/2
[77] Digital input x30/3
[78] Digital input x30/4
[79] Digital input x46/1
[80] Digital input x46/3
[81] Digital input x46/5
[82] Digital input x46/7
[83] Digital input x46/9
[84] Digital input x46/11
[85] Digital input x46/13
[90] ATEX ETR cur. warning Available if parameter 1-90 Motor
Thermal Protection is set to [20]
ATEX ETR or [21] Advanced ETR . If
the alarm 164, ATEX ETR
cur.lim.alarm is active, the output is
1.
[91] ATEX ETR cur. alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20]
ATEX ETR or [21] Advanced ETR . If
alarm 166, ATEX ETR freq.lim.alarm
is active, the output is 1.
[92] ATEX ETR freq.
warning Available if parameter 1-90 Motor
Thermal Protection is set to [20]
ATEX ETR or [21] Advanced ETR . If
alarm 163, ATEX ETR cur.lim.warning
is active, the output is 1.
[93] ATEX ETR freq. alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20]
ATEX ETR or [21] Advanced ETR . If
warning 165, ATEX ETR
13-02 Stop Event
Select the boolean (true or false) input to deactivate smart logic
control.
Option: Function:
freq.lim.warning is active, the
output is 1.
[94] RS Flipflop 0 See parameter group 13-1*
Comparators .
[95] RS Flipflop 1 See parameter group 13-1*
Comparators .
[96] RS Flipflop 2 See parameter group 13-1*
Comparators .
[97] RS Flipflop 3 See parameter group 13-1*
Comparators .
[98] RS Flipflop 4 See parameter group 13-1*
Comparators .
[99] RS Flipflop 5 See parameter group 13-1*
Comparators .
[100] RS Flipflop 6 See parameter group 13-1*
Comparators .
[101] RS Flipflop 7 See parameter group 13-1*
Comparators .
[102] Relay 1
[103] Relay 2
[104] Relay 3
X47/VLT
®
Extended Relay Card MCB
113.
[105] Relay 4
X47/VLT
®
Extended Relay Card MCB
113.
[106] Relay 5
X47/VLT
®
Extended Relay Card MCB
113.
[107] Relay 6
X47/VLT
®
Extended Relay Card MCB
113.
[108] Relay 7
X34/VLT
®
Relay Card MCB 105.
[109] Relay 8
X34/VLT
®
Relay Card MCB 105.
[110] Relay 9
X34/VLT
®
Relay Card MCB 105.
[222] Homing Ok
[223] On Target
[224] Position Error
[225] Position Limit
[226] Touch on Target
[227] Touch Activated
13-03 Reset SLC
Option: Function:
[0]
*
Do not reset
SLC Retain programmed settings in parameter
group 13-** Smart Logic .
[1] Reset SLC Reset all parameters in parameter group 13-
** Smart Logic to default settings.
Parameter Descriptions Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 169
3 3