Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 183 / 346

13-42 Logic Rule Boolean 2
Option: Function:
[77] Digital input x30/3
[78] Digital input x30/4
[79] Digital input x46/1
[80] Digital input x46/3
[81] Digital input x46/5
[82] Digital input x46/7
[83] Digital input x46/9
[84] Digital input
x46/11
[85] Digital input
x46/13
[90] ATEX ETR cur.
warning Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If alarm 164,
ATEX ETR cur.lim.alarm is active, the
output is 1.
[91] ATEX ETR cur.
alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If alarm 166,
ATEX ETR freq.lim.alarm is active, the
output is 1.
[92] ATEX ETR freq.
warning Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If alarm 163,
ATEX ETR cur.lim.warning is active, the
output is 1.
[93] ATEX ETR freq.
alarm Available if parameter 1-90 Motor
Thermal Protection is set to [20] ATEX
ETR or [21] Advanced ETR . If warning
165, ATEX ETR freq.lim.warning is active,
the output is 1.
[94] RS Flipflop 0 See
parameter group 13-1*
Comparators
.
[95] RS Flipflop 1 See parameter group 13-1*
Comparators .
[96] RS Flipflop 2 See parameter group 13-1*
Comparators .
[97] RS Flipflop 3 See parameter group 13-1*
Comparators .
[98] RS Flipflop 4 See parameter group 13-1*
Comparators .
[99] RS Flipflop 5 See parameter group 13-1*
Comparators .
[100] RS Flipflop 6 See parameter group 13-1*
Comparators .
[101] RS Flipflop 7 See parameter group 13-1*
Comparators .
[102] Relay 1
[103] Relay 2
13-42 Logic Rule Boolean 2
Option: Function:
[104] Relay 3
X47/VLT
®
Extended Relay Card MCB
113.
[105] Relay 4
X47/VLT
®
Extended Relay Card MCB
113.
[106] Relay 5
X47/VLT
®
Extended Relay Card MCB
113.
[107] Relay 6
X47/VLT
®
Extended Relay Card MCB
113.
[108] Relay 7
X34/VLT
®
Relay Card MCB 105.
[109] Relay 8
X34/VLT
®
Relay Card MCB 105.
[110] Relay 9
X34/VLT
®
Relay Card MCB 105.
[222] Homing Ok
NOTICE
This option is available only with
software version 48.20 and
newer.
Homing is completed with the
selected homing function
(
parameter 17-80 Homing Function ).
[223] On Target
NOTICE
This option is available only with
software version 48.20 and
newer.
Positioning is completed and the on-
target signal is sent when the actual
position is within
parameter 3-05 On
Reference Window for the duration of
parameter 3-09 On Target Time and the
actual speed does not exceed
parameter 3-05 On Reference Window .
[224] Position Error
NOTICE
This option is available only with
software version 48.20 and
newer.
The position error exceeds the value
in
parameter 4-71 Maximum Position
Error for the time set in
parameter 4-72 Position Error Timeout .
[225] Position Limit
NOTICE
This option is available only with
software version 48.20 and
newer.
The position is outside the limits set
in
parameter 3-06 Minimum Position
and parameter 3-07 Maximum Position .
Parameter Descriptions Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 181
3 3