0-20 Display Line 1.1 Small
Option:
Function:
corresponds to the far left of the
used bits. Signal low = 0; Signal
high = 1.
[1661] Terminal 53 Switch
Setting
Setting of input terminal 54. Current
= 0; Voltage = 1.
[1662] Analog Input 53
Actual value at input 53 either as a
reference or protection value.
[1663] Terminal 54 Switch
Setting
Setting of input terminal 54. Current
= 0; Voltage = 1.
[1664] Analog Input 54
Actual value at input 54 either as
reference or protection value.
[1665] Analog Output 42
[mA]
Actual value at output 42 in mA.
Use
parameter 6-50 Terminal 42
Output
to select the value to be
shown.
[1666] Digital Output [bin] Binary value of all digital outputs.
[1667] Freq. Input #29 [Hz] Actual value of the frequency
applied at terminal 29 as an impulse
input.
[1668] Freq. Input #33 [Hz] Actual value of the frequency
applied at terminal 33 as an impulse
input.
[1669] Pulse Output #27
[Hz]
Actual value of impulses applied to
terminal 27 in digital output mode.
[1670] Pulse Output #29
[Hz]
Actual value of impulses applied to
terminal 29 in digital output mode.
[1671] Relay Output [bin]
[1672] Counter A
Application-dependent (for example
SLC control).
[1673] Counter B
Application-dependent (for example
SLC control).
[1674] Prec. Stop Counter
Shows the actual value of the
counter.
[1675] Analog In X30/11
Actual value at input X30/11 either
as reference or protection value.
[1676] Analog In X30/12
Actual value at input X30/12 either
as reference or protection value.
[1677] Analog Out X30/8
[mA]
Actual value at output X30/8 in mA.
Use
parameter 6-60 Terminal X30/8
Output
to select the value to be
shown.
[1678] Analog Out X45/1
[mA]
[1679] Analog Out X45/3
[mA]
[1680] Fieldbus CTW 1
Control word (CTW) received from
the bus master.
0-20 Display Line 1.1 Small
Option:
Function:
[1682] Fieldbus REF 1
Main reference value sent with
control word from the bus master.
[1684] Comm. Option STW Extended fieldbus communication
option status word.
[1685] FC Port CTW 1
Control word (CTW) received from
the bus master.
[1686] FC Port REF 1
Status word (STW) sent to the bus
master.
[1687] Bus Readout Alarm/
Warning
[1689] Configurable
Alarm/Warning
Word
[1690] Alarm Word
1 or more alarms in a hex code.
[1691] Alarm Word 2
1 or more alarms in a hex code.
[1692] Warning Word
1 or more warnings in a hex code.
[1693] Warning Word 2
1 or more warnings in a hex code.
[1694] Ext. Status Word
1 or more status conditions in a hex
code.
[1695] Ext. Status Word 2
One or more status conditions in a
hex code.
[1696] Maintenance Word
[1697] Alarm Word 3
[1698] Warning Word 3
[1827] Safe Opt. Est.
Speed
[1828] Safe Opt. Meas.
Speed
[1829] Safe Opt. Speed
Error
[1836] Analog Input X48/2
[mA]
[1837] Temp. Input X48/4
[1838] Temp. Input X48/7
[1839] Temp. Input X48/10
[1843] Analog Out X49/7
[1844] Analog Out X49/9
[1845] Analog Out X49/11
[1860] Digital Input 2
[1870] Mains Voltage
[1871] Mains Frequency
[1872] Mains Imbalance
[1875] Rectifier DC Volt.
[1890] Process PID Error
[1891] Process PID Output
[1892] Process PID
Clamped Output
[1893] Process PID Gain
Scaled Output
[2316] Maintenance Text
Parameter Descriptions
Programming Guide
MG33MP02
Danfoss A/S © 10/2018 All rights reserved.
29
3
3
Summary of Contents for VLT AutomationDrive FC 302
Page 2: ......