Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 307 / 346

10-07 Readout Bus Off Counter 0 N/A All set-ups TRUE 0 Uint8
10-1* DeviceNet
10-10 Process Data Type Selection ExpressionLimit All set-ups TRUE - Uint8
10-11 Process Data Config Write ExpressionLimit All set-ups TRUE - Uint16
10-12 Process Data Config Read ExpressionLimit All set-ups TRUE - Uint16
10-13 Warning Parameter 0 N/A All set-ups TRUE 0 Uint16
10-14 Net Reference [0] Off 2 set-ups TRUE - Uint8
10-15 Net Control [0] Off 2 set-ups TRUE - Uint8
10-2* COS Filters
10-20 COS Filter 1 0 N/A All set-ups FALSE 0 Uint16
10-21 COS Filter 2 0 N/A All set-ups FALSE 0 Uint16
10-22 COS Filter 3 0 N/A All set-ups FALSE 0 Uint16
10-23 COS Filter 4 0 N/A All set-ups FALSE 0 Uint16
10-3* Parameter Access
10-30 Array Index 0 N/A 2 set-ups TRUE 0 Uint8
10-31 Store Data Values [0] Off All set-ups TRUE - Uint8
10-32 Devicenet Revision ExpressionLimit All set-ups TRUE 0 Uint16
10-33 Store Always [0] Off 1 set-up TRUE - Uint8
10-34 DeviceNet Product Code ExpressionLimit 1 set-up TRUE 0 Uint16
10-39 Devicenet F Parameters 0 N/A All set-ups TRUE 0 Uint32
10-5* CANopen
10-50 Process Data Config Write. ExpressionLimit 2 set-ups TRUE - Uint16
10-51 Process Data Config Read. ExpressionLimit 2 set-ups TRUE - Uint16
5.3.12 12-** Ethernet
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
12-0* IP Settings
12-00 IP Address Assignment ExpressionLimit 2 set-ups TRUE - Uint8
12-01 IP Address 0 N/A 1 set-up TRUE 0
OctStr[
4]
12-02 Subnet Mask 0 N/A 1 set-up TRUE 0
OctStr[
4]
12-03 Default Gateway 0 N/A 1 set-up TRUE 0
OctStr[
4]
12-04 DHCP Server 0 N/A 2 set-ups TRUE 0
OctStr[
4]
12-05 Lease Expires ExpressionLimit All set-ups TRUE 0 TimD
12-06 Name Servers 0 N/A 1 set-up TRUE 0
OctStr[
4]
12-07 Domain Name 0 N/A 1 set-up TRUE 0
VisStr[
48]
12-08 Host Name 0 N/A 1 set-up TRUE 0
VisStr[
48]
12-09 Physical Address 0 N/A 1 set-up TRUE 0
VisStr[
17]
12-1* Ethernet Link Parameters
12-10 Link Status [0] No Link All set-ups TRUE - Uint8
12-11 Link Duration ExpressionLimit All set-ups TRUE 0 TimD
12-12 Auto Negotiation ExpressionLimit 2 set-ups TRUE - Uint8
12-13 Link Speed ExpressionLimit 2 set-ups TRUE - Uint8
12-14 Link Duplex ExpressionLimit 2 set-ups TRUE - Uint8
12-18 Supervisor MAC 0 N/A 2 set-ups TRUE 0
OctStr[
6]
Parameter Lists Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 305
5 5