Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 282 / 346

15-76 Option in Slot C1/E1 0 N/A All set-ups FALSE 0
VisStr[
30]
15-77 Slot C1/E1 Option SW Version 0 N/A All set-ups FALSE 0
VisStr[
20]
15-8* Operating Data II
15-80 Fan Running Hours 0 h All set-ups TRUE 74 Uint32
15-81 Preset Fan Running Hours 0 h All set-ups TRUE 74 Uint32
15-89 Configuration Change Counter 0 N/A All set-ups FALSE 0 Uint16
15-9* Parameter Info
15-92 Defined Parameters 0 N/A All set-ups FALSE 0 Uint16
15-93 Modified Parameters 0 N/A All set-ups FALSE 0 Uint16
15-98 Drive Identification 0 N/A All set-ups FALSE 0
VisStr[
40]
15-99 Parameter Metadata 0 N/A All set-ups FALSE 0 Uint16
5.2.16 16-** Data Readouts
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
16-0* General Status
16-00 Control Word 0 N/A All set-ups FALSE 0 V2
16-01 Reference [Unit] 0 ReferenceFeedbackUnit All set-ups FALSE -3 Int32
16-02 Reference % 0 % All set-ups FALSE -1 Int16
16-03 Status Word 0 N/A All set-ups FALSE 0 V2
16-05 Main Actual Value [%] 0 % All set-ups FALSE -2 N2
16-06 Actual Position 0 CustomReadoutUnit2 All set-ups FALSE 0 Int32
16-09 Custom Readout 0 CustomReadoutUnit All set-ups FALSE -2 Int32
16-1* Motor Status
16-10 Power [kW] 0 kW All set-ups FALSE 1 Int32
16-11 Power [hp] 0 hp All set-ups FALSE -2 Int32
16-12 Motor Voltage 0 V All set-ups FALSE -1 Uint16
16-13 Frequency 0 Hz All set-ups FALSE -1 Uint16
16-14 Motor current 0 A All set-ups FALSE -2 Int32
16-15 Frequency [%] 0 % All set-ups FALSE -2 N2
16-16 Torque [Nm] 0 Nm All set-ups FALSE -1 Int16
16-17 Speed [RPM] 0 RPM All set-ups FALSE 67 Int32
16-18 Motor Thermal 0 % All set-ups FALSE 0 Uint8
16-19 Thermistor Sensor Temperature 0 °C All set-ups FALSE 100 Int16
16-20 Motor Angle 0 N/A All set-ups TRUE 0 Uint16
16-21 Torque [%] High Res. 0 % All set-ups FALSE -1 Int16
16-22 Torque [%] 0 % All set-ups FALSE 0 Int16
16-23 Motor Shaft Power [kW] 0 kW All set-ups TRUE 1 Int32
16-24 Calibrated Stator Resistance 0.0000 Ohm All set-ups x TRUE -4 Uint32
16-25 Torque [Nm] High 0 Nm All set-ups FALSE -1 Int32
16-3* Drive Status
16-30 DC Link Voltage 0 V All set-ups FALSE 0 Uint16
16-31 System Temp. 0 °C All set-ups x TRUE 100 Int8
16-32 Brake Energy /s 0 kW All set-ups FALSE 0 Uint32
16-33 Brake Energy Average 0 kW All set-ups FALSE 0 Uint32
16-34 Heatsink Temp. 0 °C All set-ups FALSE 100 Uint8
16-35 Inverter Thermal 0 % All set-ups FALSE 0 Uint8
16-36 Inv. Nom. Current ExpressionLimit All set-ups FALSE -2 Uint32
16-37 Inv. Max. Current ExpressionLimit All set-ups FALSE -2 Uint32
16-38 SL Controller State 0 N/A All set-ups FALSE 0 Uint8
16-39 Control Card Temp. 0 °C All set-ups FALSE 100 Uint8
Parameter Lists
VLT
®
AutomationDrive FC 301/302
280 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
5 5