Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 292 / 346

36-63 Terminal X49/11 Max. Scale 100 % All set-ups TRUE -2 Int16
36-64 Terminal X49/11 Bus Control 0 % All set-ups TRUE -2 N2
36-65 Terminal X49/11 Timeout Preset 0 % 1 set-up TRUE -2 Uint16
5.2.28 40-** Special Settings
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
40-4* Extend. Fault Log
40-40 Fault Log: Ext. Reference 0 % All set-ups FALSE -1 Int16
40-41 Fault Log: Frequency 0 Hz All set-ups FALSE -1 Uint16
40-42 Fault Log: Current 0 A All set-ups FALSE -2 Int32
40-43 Fault Log: Voltage 0 V All set-ups FALSE -1 Uint16
40-44 Fault Log: DC Link Voltage 0 V All set-ups FALSE 0 Uint16
40-45 Fault Log: Control Word 0 N/A All set-ups FALSE 0 V2
40-46 Fault Log: Status Word 0 N/A All set-ups FALSE 0 V2
40-5* Advanced Control Settings
40-50 Flux Sensorless Model Shift ExpressionLimit All set-ups FALSE - Uint8
40-51 Flux Sensorless Corr. Gain ExpressionLimit All set-ups TRUE -1 Uint32
Parameter Lists
VLT
®
AutomationDrive FC 301/302
290 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
5 5