Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 285 / 346

18-44 Analog Out X49/9 0 N/A All set-ups FALSE -3 Int16
18-45 Analog Out X49/11 0 N/A All set-ups FALSE -3 Int16
18-5* Active Alarms/Warnings
18-55 Active Alarm Numbers 0 N/A All set-ups TRUE 0 Uint16
18-56 Active Warning Numbers 0 N/A All set-ups TRUE 0 Uint16
18-6* Inputs & Outputs 2
18-60 Digital Input 2 0 N/A All set-ups FALSE 0 Uint16
18-7* Rectifier Status
18-70 Mains Voltage 0 V All set-ups x TRUE 0 Uint16
18-71 Mains Frequency 0 Hz All set-ups x TRUE -1 Int16
18-72 Mains Imbalance 0 % All set-ups x TRUE -1 Uint16
18-75 Rectifier DC Volt. 0 V All set-ups x TRUE 0 Uint16
18-9* PID Readouts
18-90 Process PID Error 0 % All set-ups FALSE -1 Int16
18-91 Process PID Output 0 % All set-ups FALSE -1 Int16
18-92 Process PID Clamped Output 0 % All set-ups FALSE -1 Int16
18-93 Process PID Gain Scaled Output 0 % All set-ups FALSE -1 Int16
5.2.19 22-** Appl. Functions
Par.
No. #
Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
22-0* Miscellaneous
22-00 External Interlock Delay 0 s All set-ups TRUE 0 Uint16
Table 5.3
5.2.20 23-** Time-based Functions
Par.
No. #
Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
23-0* Timed Actions
23-00 ON Time ExpressionLimit 2 set-ups x TRUE 0
TimeO
fDayW
oDate
23-01 ON Action [0] DISABLED 2 set-ups x TRUE - Uint8
23-02 OFF Time ExpressionLimit 2 set-ups x TRUE 0
TimeO
fDayW
oDate
23-03 OFF Action [1] No action 2 set-ups x TRUE - Uint8
23-04 Occurrence [0] All days 2 set-ups x TRUE - Uint8
23-0* Timed Actions Settings
23-08 Timed Actions Mode [0] Timed Actions Auto 2 set-ups x TRUE - Uint8
23-09 Timed Actions Reactivation [1] Enabled 2 set-ups x TRUE - Uint8
23-1* Maintenance
23-10 Maintenance Item [1] Motor bearings 1 set-up x TRUE - Uint8
23-11 Maintenance Action [1] Lubricate 1 set-up x TRUE - Uint8
23-12 Maintenance Time Base [0] Disabled 1 set-up x TRUE - Uint8
23-13 Maintenance Time Interval 1 h 1 set-up x TRUE 74 Uint32
23-14 Maintenance Date and Time ExpressionLimit 1 set-up x TRUE 0
TimeO
fDay
23-1* Maintenance Reset
23-15 Reset Maintenance Word [0] Do not reset All set-ups x TRUE - Uint8
23-16 Maintenance Text 0 N/A 1 set-up x TRUE 0
VisStr[
20]
Table 5.4
Parameter Lists Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 283
5 5