Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 284 / 346

5.2.17 17-** Position Feedback
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
17-1* Inc. Enc. Interface
17-10 Signal Type [1] RS422 (5V TTL) All set-ups FALSE - Uint8
17-11 Resolution (PPR) 1024 N/A All set-ups FALSE 0 Uint16
17-2* Abs. Enc. Interface
17-20 Protocol Selection [0] None All set-ups FALSE - Uint8
17-21 Resolution (Positions/Rev) ExpressionLimit All set-ups FALSE 0 Uint32
17-22 Multiturn Revolutions 1 N/A All set-ups FALSE 0 Uint32
17-24 SSI Data Length 13 N/A All set-ups FALSE 0 Uint8
17-25 Clock Rate 260 kHz All set-ups FALSE 3 Uint16
17-26 SSI Data Format [0] Gray code All set-ups FALSE - Uint8
17-34 HIPERFACE Baudrate [4] 9600 All set-ups FALSE - Uint8
17-5* Resolver Interface
17-50 Poles 2 N/A 1 set-up FALSE 0 Uint8
17-51 Input Voltage 7 V 1 set-up FALSE -1 Uint8
17-52 Input Frequency 10 kHz 1 set-up FALSE 2 Uint8
17-53 Transformation Ratio 0.5 N/A 1 set-up FALSE -1 Uint8
17-56 Encoder Sim. Resolution [0] Disabled 1 set-up FALSE - Uint8
17-59 Resolver Interface [0] Disabled 2 set-ups FALSE - Uint8
17-6* Monitoring and App.
17-60 Feedback Direction [0] Clockwise All set-ups FALSE - Uint8
17-61 Feedback Signal Monitoring [1] Warning All set-ups TRUE - Uint8
17-7* Position Scaling
17-70 Position Unit [0] pu All set-ups TRUE - Uint8
17-71 Position Unit Scale 0 N/A All set-ups FALSE 0 Int8
17-72 Position Unit Numerator 1024 N/A All set-ups FALSE 0 Int32
17-73 Position Unit Denominator 1 N/A All set-ups FALSE 0 Int32
17-74 Position Offset 0 N/A All set-ups FALSE 0 Int32
5.2.18 18-** Data Readouts 2
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups x FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups x FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups x FALSE 0 Uint32
18-03 Maintenance Log: Date and Time ExpressionLimit All set-ups x FALSE 0
TimeO
fDay
18-2* Motor Readouts
18-27 Safe Opt. Est. Speed 0 RPM All set-ups TRUE 67 Int32
18-28 Safe Opt. Meas. Speed 0 RPM All set-ups TRUE 67 Int32
18-29 Safe Opt. Speed Error 0 RPM All set-ups TRUE 67 Int32
18-3* Analog Readouts
18-36 Analog Input X48/2 [mA] 0 N/A All set-ups TRUE -3 Int32
18-37 Temp. Input X48/4 0 N/A All set-ups TRUE 0 Int16
18-38 Temp. Input X48/7 0 N/A All set-ups TRUE 0 Int16
18-39 Temp. Input X48/10 0 N/A All set-ups TRUE 0 Int16
18-4* PGIO Data Readouts
18-43 Analog Out X49/7 0 N/A All set-ups FALSE -3 Int16
Parameter Lists
VLT
®
AutomationDrive FC 301/302
282 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
5 5