Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 176 / 346

Parameter Setting Notes
Parameter 13-42 Logic Rule
Boolean 2
[1]
[2] Running –
Parameter 13-41 Logic Rule
Operator 1
[1]
[1] AND –
Parameter 13-15 RS-FF Operand
S
[0]
[26] Logic
rule 0
Output from
parameter 13-41 Log
ic Rule Operator 1
[0].
Parameter 13-16 RS-FF Operand
R
[0]
[27] Logic
rule 1
Output from
parameter 13-41 Log
ic Rule Operator 1
[1].
Parameter 13-51 SL Controller
Event
[0]
[94] RS
Flipflop 0
Output from
parameter 13-15 RS-
FF Operand S
and
parameter 13-16 RS-
FF Operand R
.
Parameter 13-52 SL Controller
Action
[0]
[22] Run –
Parameter 13-51 SL Controller
Event
[1]
[27] Logic
rule 1
–
Parameter 13-52 SL Controller
Action
[1]
[24] Stop –
Table 3.26 Operators
13-15 RS-FF Operand S
Option: Function:
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
13-15 RS-FF Operand S
Option: Function:
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key [OK] is pressed. Only available on
the graphical LCP.
[44] Reset key [Reset] is pressed. Only available on
the graphical LCP.
[45] Left key [
◄
] is pressed. Only available on the
graphical LCP.
[46] Right key [
►
] is pressed. Only available on the
graphical LCP.
[47] Up key
[
▲
] is pressed. Only available on
the graphical LCP.
[48] Down key
[
▼
] is pressed. Only available on
the graphical LCP.
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[75] Start command given
[76] Digital input x30/2
[77] Digital input x30/3
[78] Digital input x30/4
[79] Digital input x46/1
[80] Digital input x46/3
[81] Digital input x46/5
[82] Digital input x46/7
[83] Digital input x46/9
[84] Digital input x46/11
Parameter Descriptions
VLT
®
AutomationDrive FC 301/302
174 Danfoss A/S © 10/2018 All rights reserved. MG33MP02
3 3