Danfoss VLT AutomationDrive FC 302, Programming Manual, Page: 271 / 346

4-62 Bypass Speed To [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
4-63 Bypass Speed To [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
4-8* Power Limit
4-80 Power Limit Func. Motor Mode [0] Disabled All set-ups x TRUE - Uint8
4-81 Power Limit Func. Generator Mode [0] Disabled All set-ups x TRUE - Uint8
4-82 Power Limit Motor Mode 100.0 % All set-ups x TRUE -1 Uint16
4-83 Power Limit Generator Mode 100.0 % All set-ups x TRUE -1 Uint16
4-9* Directional Limits
4-90 Directional Limit Mode [0] Disabled All set-ups TRUE - Uint8
4-91 Positive Speed Limit [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
4-92 Positive Speed Limit [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
4-93 Negative Speed Limit [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
4-94 Negative Speed Limit [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
4-95 Positive Torque limit ExpressionLimit All set-ups TRUE -1 Uint16
4-96 Negative Torque limit ExpressionLimit All set-ups TRUE -1 Uint16
5.2.6 5-** Digital In/Out
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
5-0* Digital I/O mode
5-00 Digital I/O Mode [0] PNP All set-ups FALSE - Uint8
5-01 Terminal 27 Mode [0] Input All set-ups TRUE - Uint8
5-02 Terminal 29 Mode [0] Input All set-ups x TRUE - Uint8
5-1* Digital Inputs
5-10 Terminal 18 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-11 Terminal 19 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-12 Terminal 27 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-13 Terminal 29 Digital Input ExpressionLimit All set-ups x TRUE - Uint8
5-14 Terminal 32 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-15 Terminal 33 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-16 Terminal X30/2 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-17 Terminal X30/3 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-18 Terminal X30/4 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-19 Terminal 37 Safe Stop ExpressionLimit 1 set-up TRUE - Uint8
5-20 Terminal X46/1 Digital Input [0] No operation All set-ups TRUE - Uint8
5-21 Terminal X46/3 Digital Input [0] No operation All set-ups TRUE - Uint8
5-22 Terminal X46/5 Digital Input [0] No operation All set-ups TRUE - Uint8
5-23 Terminal X46/7 Digital Input [0] No operation All set-ups TRUE - Uint8
5-24 Terminal X46/9 Digital Input [0] No operation All set-ups TRUE - Uint8
5-25 Terminal X46/11 Digital Input [0] No operation All set-ups TRUE - Uint8
5-26 Terminal X46/13 Digital Input [0] No operation All set-ups TRUE - Uint8
5-3* Digital Outputs
5-30 Terminal 27 Digital Output ExpressionLimit All set-ups TRUE - Uint8
5-31 Terminal 29 Digital Output ExpressionLimit All set-ups x TRUE - Uint8
5-32 Term X30/6 Digi Out (MCB 101) ExpressionLimit All set-ups TRUE - Uint8
5-33 Term X30/7 Digi Out (MCB 101) ExpressionLimit All set-ups TRUE - Uint8
5-4* Relays
5-40 Function Relay ExpressionLimit All set-ups TRUE - Uint8
5-41 On Delay, Relay 0.01 s All set-ups TRUE -2 Uint16
5-42 Off Delay, Relay 0.01 s All set-ups TRUE -2 Uint16
5-5* Pulse Input
5-50 Term. 29 Low Frequency 100 Hz All set-ups x TRUE 0 Uint32
5-51 Term. 29 High Frequency ExpressionLimit All set-ups x TRUE 0 Uint32
5-52 Term. 29 Low Ref./Feedb. Value 0 ReferenceFeedbackUnit All set-ups x TRUE -3 Int32
Parameter Lists Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 269
5 5