manualshive.com logo in svg

CENTROTHERM E1200 HT 260-3, Operating Instructions Manual

The CENTROTHERM E1200 HT 260-3 is a cutting-edge product designed to meet your heating needs. With its innovative features and user-friendly interface, this device ensures optimal performance. To familiarize yourself with its operation, download the comprehensive Operating Instructions Manual for free from our website - manualshive.com.

Share
Download
background image

E1200 HT 260-3

 

3BFunctional Description

 

23.04.07 

00401010_41087 

4-23

 

4.10 

Process Description 

The equipment is designed for the processes listed in chapter 2.2 Process Overview, 
page 2-5 . 

A recipe is used to control the process flow. The recipe predefines the process 
parameters such as ramp up and ramp down rates, process temperatures, gas and gas 
flow velocity, dwell time, etc. and monitors compliance. 

4.10.1 

Process Flow Oxidation/Diffusion/Annealing 

The following sequence gives an overview on a typical series of steps:  

1.  Furnace loading procedure: The process boat is loaded with wafers and moved 

into the process tube with a paddle. The process boat is lowered. Then the paddle 
is moved out of the process tube and the process tube is closed. 

2.  N2 purging: The process tube is purged with nitrogen. 

3.  Ramp up: The temperature within the process tube is incrementally increased to 

process temperature. The ramp up slope is defined in the respective recipe. 

4.  Reaction phase: The process tube is flooded with process gases and the desired 

reaction takes place on the wafers. In the process, process gases are steadily 
conducted into the process tube, and after passing through the process tube, they 
are lead to the customer's gas exhaust system via gas discharge pipe (option). 

5.  N2 purging: After the reaction phase, the process tube is purged with nitrogen to 

remove gas residues. 

6.  Ramp down: The temperature within the process tube is incrementally decreased. 

The ramp down slope is defined in the respective recipe. 

7.  Furnace unloading procedure: The loading machine moves the paddle into the 

process tube and lifts the process boat which is loaded with wafers. The paddle is 
moved out of the process tube. The lift (option) takes the process boat with the 
wafers and puts it into the storage (option) to cool down. 

Summary of Contents for E1200 HT 260-3










































































































































































































































Reviews:

No comments

Related manuals for E1200 HT 260-3

Bard W24G1-A Installation Instructions Manual preview
W24G1-A
Brand: Bard Pages: 67
Fedders AFUE 2-Stage Brochure preview
AFUE 2-Stage
Brand: Fedders Pages: 4
Nortek T169-10A Installation, Operation & Maintenance Manual preview
T169-10A
Brand: Nortek Pages: 11
Lennox G43UF SERIES User'S Information Manual preview
G43UF SERIES
Brand: Lennox Pages: 7
Lennox EL180DF045E36A Unit Information preview
EL180DF045E36A
Brand: Lennox Pages: 28
Lennox EL280UH Installation Instructions Manual preview
EL280UH
Brand: Lennox Pages: 51
Lennox ELITE EL296DFE Installation Instructions Manual preview
ELITE EL296DFE
Brand: Lennox Pages: 61
Lennox EL195UH040NE36B Installation Instructions And Use preview
EL195UH040NE36B
Brand: Lennox Pages: 50
Lennox EL296DF045XE36B Manual preview
EL296DF045XE36B
Brand: Lennox Pages: 65
VERDER CARBOLITE GERO HST 12/400 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO HST 12/400
Brand: VERDER Pages: 30
VERDER CARBOLITE GERO KZS 12/600 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO KZS 12/600
Brand: VERDER Pages: 32
VERDER CARBOLITE GERO GSM 11/8 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO GSM 11/8
Brand: VERDER Pages: 34
VERDER CARBOLITE GERO G Series Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO G Series
Brand: VERDER Pages: 46
VERDER CARBOLITE GERO EVA 12/150B Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO EVA 12/150B
Brand: VERDER Pages: 56
CADDY PF01102 Installation And Operating Instructions Manual preview
PF01102
Brand: CADDY Pages: 79
Carrier 58CMR User'S Information Manual preview
58CMR
Brand: Carrier Pages: 8
Carrier 58CLA User'S Information Manual preview
58CLA
Brand: Carrier Pages: 8
Carrier 391D Installation Instructions Manual preview
391D
Brand: Carrier Pages: 8

Brands by name

Popular brands

Load more brands