CENTROTHERM E1200 HT 260-3, Operating Instructions Manual

Page: 110 / 233

E1200 HT 260-3
8BMaintenance
23.04.07
9-6
00401010_41087
9.2.2 ID 3001 – 3050 Error Messages CMS
Only stated ID No. are used.
ID
No.
Error message
text
Cause Troubleshooting
3001
3002
3003
3004
3005 CESAR stack
without
connection communication
with CESAR
control computer
interrupted Check CMS.
Check network connection.
3011
3012
3013
3014 water flow gas
side stack insufficient water
flow for flanges
on gas cabinet
side of
equipment or for
flanges on cold
trap side of
equipment Open cooling water inlet resp. outlet at
flange and check flow.
Check switching point of sensor.
Check electrical output of sensor.
Check input module connection, see gas
and electrical circuit diagrams listed in
chapter 12.2 Drawings, Circuit Diagrams,
Overviews, page 12-1.
3015
3016
3017
3018 water flow
toxic gas exhaust
side stack insufficient water
flow for flanges
on toxic gas
exhaust side of
equipment Open cooling water inlet resp. outlet at
flange and check flow.
Check switching point of sensor.
Check electrical output of sensor.
Check input module connection, see gas
and electrical circuit diagrams listed in
chapter 12.2 Drawings, Circuit Diagrams,
Overviews, page 12-1.
3019 water flow main
cooler
insufficient water
flow in main
cooler Check cooling water pressure.
Check if the stop valve of the main cooler
cooling water inlet and outlet is
completely open.
Check switching point of sensor.
Check contact of flow control device for
cooling water.
Check input module connection, see gas
and electrical circuit diagrams listed in
chapter 12.2 Drawings, Circuit Diagrams,
Overviews, page 12-1.