CENTROTHERM E1200 HT 260-3, Operating Instructions Manual

Page: 91 / 233

E1200 HT 260-3
7BOperation
23.04.07
00401010_41087
8-5
8.1.3 Navigation Bar
The information fields of the individual functional areas and the online help are called
up by pressing the corresponding button in the navigation bar:
Figure 8-3: Information Field Buttons on the Navigation Bar
Description of items in figure 8-3:
1 jobs 4 Setup
2 system 5 alarms
3 datalog 6 help (online help)
Depending on equipment condition, the buttons used to call up the individual
information fields have a colored border. The color code corresponds with the code
used for the "signal lamp".
Depending on the selected functional area, the information field can consist of several
tabstrips selected via tabs.
The user can call up the following information fields via buttons in the navigation bar:
"Jobs" .......................................Contains information for monitoring the system. The
screen shows the current states of the process tubes,
the data entry fields for material loading, and the "Job
List".
"System" ....................................Contains the status view of the system components, a
boat overview showing condition and position of the
boats and recipes used, and the handling menu for
state display and manual operation of the lift as well as
the additional display of the centrotherm machine
safety (CMS).
"Datalog"....................................Contains the logged system data.
"Setup".......................................Contains the parameters to set up the boats, the
recipes, the lift, the WTS and the CMS as well as the
parameters to determine the general configuration
data, the preventive maintenance data and the material
tracking.
"Alarms".....................................Contains the logged system alarms.
"Help".........................................Contains the online help for the CMI software.