AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 714 / 887

Memory Card
4–342
Programming Procedures
Board Mismatch
Restore nn:
n = filename selected
Restore Failure
RESTORE IS CANCELED.
Board mismatch between
control unit and file.
Exit
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
■
Repeat the restore procedure with another file.
■
Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
Strap in Place for Key Mode but Mode is Set to
Hybrid
Restore n:
n = filename selected
Restore Failure
RESTORE IS CANCELED.
Restore File Mode is
Hybrid/PBX.
Control Unit
strap in place for KEY.
Exit
!
CAUTION:
This procedure should be performed only by qualified service personnel.
If the processor module has been set for Permanent Key mode, a restore to
Hybrid/PBX mode is not possible. A service associate must be notified in order
to modify the processor.