AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 655 / 887

Automatic Route Selection
Programming Procedures
4–283
Automatic Route Selection
This section contains programming procedures for the following Automatic Route
Selection (ARS) features:
■
1 + 7-Digit Dialing Requirements
■
ARS Tables
■
Start and Stop Times for Subpatterns
■
Pool Routing
■
Facility Restriction Level (FRL)
■
Digit Absorption
■
Other Digits
■
N11 Special Numbers Tables
■
Dial 0 Table
■
Voice and/or Data Routing
NOTE:
ARS applies to Hybrid/PBX mode only.
1 + 7-Digit Dialing Requirements
Use this procedure for calls placed within the same (home) area code as the
system. The procedure allows you to specify whether or not the local telephone
company requires a 1 to precede the 7-digit number. The two available settings
are:
■
Within Area Code. Requires that a 1 plus a 7-digit number must be
dialed; the system checks the 1 + 7-digit tables for routing.
■
Not Within Area Code. Does not require that a 1 precede the 7-digit
number (the system does this automatically).