AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 504 / 887

PRI Facilities
4–132
Programming Procedures
Console Display/Instructions Additional Information PC
2 Select PRI.
Lines and Trunks: >
Make a selection
LS/GS/DS1
PRI
_
TIE Lines Copy
TT/LS Disc RemoteAccss
DID Pools
Exit Toll Type
6
3 Select Phone Number.
PRI Lines:
Make a selection
_
PhoneNumber Protocol
B-ChannlGrp DialPlanRtg
NumbrToSend OutgoingTbl
Test TelNum
Exit
1
4 Enter the line number.
PRI Phone Number:
Enter line number
Dial or type:
Û
Trunk number [ nnn ]
Backspace
Slot and port number
*
[ sspp ]
Exit Enter
Logical ID number
#
[
nnn
].
5 Save your entry.
Select
Enter
Enter
.
0
6 Erase the current telephone number ( N ) if one is assigned.
Line xxxx:
xxxx
= line number entered in Step 4
Enter phone number
N
Backspace Next
Exit Enter
Press Drop .
A+P
7 Enter a telephone number of up to 12 digits to be assigned to the channel
(
N = any combination of 0 to 9).
Dial or type [N].
Û
8 Continue to assign the telephone number to another PRI channel or go to
Step 9.
Select
Next Next
.
9
Return to Step 6. The next PRI Channel
will be displayed on Line 1.