AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 426 / 887

Lines and Trunks
4–54
Programming Procedures
●
Single Line Procedure
Console Display/Instructions Additional Information PC
1 Specify entry mode.
Select
Entry Mode Entry Mode
.
6
2 Enter the line/trunk number for LS-ID Delay.
LS-ID Delay:
Enter Trunk Number for
Alert Delay
Dial or type:
Û
Delete
Trunk number [ nnn ]
Backspace
Slot and port number
*
[ sspp ]
Exit Enter
Logical ID number
#
[ nnn ].
3 Assign or remove the LS-ID Delay.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove the
LS-ID delay from additional lines/trunks by
repeating Steps 2 and 3.
4 Return to the System Programming menu.
Select
Exit Exit
two times.
55
◆
Block Procedure
1 Specify the block of 20 lines associated with the 20 line buttons on the system
programming console.
Select
Lines 01-20 Lines 01-20
1
Lines 21-40 Lines 21-40
2
Lines 41-60 Lines 41-60
3
Lines 61-80 Lines 61-80
.
4
2 Assign the LS-ID Delay to the appropriate lines/trunks.
Toggle the green LED on or
off as required.
On = assign the LS-ID Delay
Off = remove the LS-ID Delay
3 Return to the System Programming menu.
Select
Exit Exit
two times.
55