AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 430 / 887

Lines and Trunks
4–58
Programming Procedures
Console Display/Instructions Additional Information PC
12 Save your entry.
Select
Enter Enter
.
0
If the slot selected in Step 11 contains a
100D module, continue with Step 13.
If the slot selected in Step 11 contains an
800 NI-BRI, go to Step 14.
13 Specify whether the clock is to be synchronized to an external endpoint (loop) or
is to be free running (local), then go to Step 15.
SecondaryClkSource Slotxx:
xx = slot number entered in Step x
Select one
_
Loop
_
Local
Select
Loop Loop
or
1
Exit Enter Local Local
.
2
14 Select the 800 NI-BRI module port to be the secondary clock source.
Secondary Loop ClkSlot xx:
Enter port number (1-8)
x
Backspace
Exit
Enter
Dial or type [x].
Û
15 Save your entry.
Select
Enter Enter
.
0
16 Select Tertiary.
Clock Syncronization:
Make a selection
Primary
Secondary
_
Tertiary
Exit
3
17 Enter the slot number of the module to contain the tertiary system clock.
Tertiary System Clock
Enter slot number (1-17)
xx
Delete
Backspace
Exit
Enter
Dial or type [xx]
Û