AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 105 / 887

Using SPM
Programming with SPM
2–27
2 Press the function key that corresponds to the module you want to select.
Boards: > Boards:
Make a selection Make a selection
1
408LSA 800LS
6 1
400E&M 016TRR
6
2
012TR/OPT 008ATL
7 2
408GLA
800GLID
7
3
800DID 008MLX
8 3
100D 800BRI
8
4
800GLS 400GLR
9 4
408GLM
5
Exit 400LSR
0 5
Exit
If the module you want to assign is not shown on the first screen of the Boards menu, press
u
to display the next menu screen.
3 Type the control unit slot number (01 through 17) in which the module is to be
installed.
module name
module name = option selected in Step 2
Enter slot numbers
(01-17)
Delete
Backspace Next
Exit Enter
4 Assign or remove the module from the slot entered in Step 3.
module name
module name
= option selected in Step 2
Enter slot numbers
nn
= slot entered in Step 3
(01-17)
nn
Delete
8
Backspace Next
9
Exit Enter
0
■
To remove the module type from the specified slot number, press
8
(
Delete
). The Boards menu reappears.
■
To assign the module type to the specified slot number and assign that
same module type to another slot, press
9
(
Next
).
■
To assign the module type to the specified slot number and assign a
different module type to another slot, press
0
(
Enter
).
■
To terminate the procedure and assign a different module, press
5
(
Exit
) and repeat Steps 2 through 4.
■
To view types of modules assigned to all slots, press
d
(
Inspect
) .
5 Save your entry.
Select
Exit. Exit.
5
The programming session terminates and
the system restarts.