AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 272 / 887

Optional Group Calling Features
3–136
Common Administrative Procedures
Console Display/Instructions Additional Information PC
15 Erase the current timeout (
xxx
).
Group Calling xxxx:
xxxx = number entered in Step 5
Enter max timeout (sec)
before overflow (0-900)
xxx
Backspace
Exit
Enter
Press Drop .
A+P
16 Enter the maximum time (in seconds) in the queue before coverage
(
xxx = 0 to 900).
Dial or type [ xxx ].
Û
17 Save your entry.
Select
Enter Enter
.
0
18 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.
Summary: Group Calling Message-Waiting
Indicator
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting No message-waiting receiver assigned
Valid Entries Extension number
Inspect No
Copy Option No