AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 523 / 887

PRI Facilities
Programming Procedures
4–151
Console Display/Instructions Additional Information PC
5 Save your entry.
Select
Enter Enter
.
0
6 Erase the current test telephone number (
N
).
Slot xx Test Tel Number:
xx = number entered in Step 4
Enter test number
N
Backspace Next
Exit Enter
Press Drop .
A+P
7 Enter a telephone number of up to 12 digits to be assigned as the test number to
the 100D module (
N = any combination of 0 to 9).
Dial or type [ N ].
Û
8 Continue to assign the test telephone number to another 100D module or go to
Step 9.
Select
Next
Next
.
9
Return to Step 6. The next slot will be
displayed on Line 1.
9 Save your entry.
Select
Enter Enter
.
0
10 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Timers and Counters
Use this procedure to set timer and counter thresholds.
!
CAUTION:
The factory settings for these thresholds are standard and rarely need to
be changed. If you are not sure of the correct timer and threshold settings
for your PRI lines and trunks, check with your AT&T representative before
you make a change. Incorrect settings can cause your PRI lines and
trunks to malfunction.
If the network does not respond before the programmed time or count, the
system takes the appropriate corrective action.