AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 666 / 887

Automatic Route Selection
4–294
Programming Procedures
Facility Restriction Level
Use this procedure to assign a Facility Restriction Level (FRL) to each route. The
FRL ranges from 0 (least restrictive) to 6 (most restrictive) and is used to restrict
user access to the route. The FRL assigned to telephones and remote access
users is the opposite of the FRL assigned to routes, where 0 is the most
restrictive and 6 is the least restrictive.
NOTE:
Pool routes must be programmed before you assign Facility Restriction
Levels.
Facility Restriction Levels are assigned to Tables 1 through 18. Tables 17 and
18, the Default Toll and Default Local tables respectively, cannot be changed.
Summary: Facility Restriction Level
Programmable by System manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3f, Automatic Route Selection Tables
Form 3g, Automatic Route Selection Default and Special
Numbers Tables
Factory Setting 3 (beginning with Release 3.1, Table 18, the Default Local
table has a factory setting of 2)
Valid Entries 0 to 6
Inspect No
Copy Option No
Console Procedure
Tables
®
ARS
®
Sub A FRL
or More and
Sub B FRL
®
Dial
table no, and pool route no.
®
Enter
®
Dial restriction level
®
Enter
®
Exit
®
Exit
PC Procedure
8
®
6
®
4
or
u
and
1
®
Type table no. and pool
route no.
®
0
®
Type restriction level
®
0
®
5
®
5
Procedure: Facility Restriction Level
Console Display/Instructions Additional Information PC
1 Select the Tables menu.
System Programming: >
Make a selection
System
Extensions
SysRenumber SysRenumber
Operator Tables
_
LinesTrunks AuxEquip
Exit NightSrvce
8