AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 257 / 887

Optional Group Features
Common Administrative Procedures
3–121
Console Display/Instructions Additional Information PC
7 Specify the extension.
Group Calling xxxx:
xxxx = number entered in Step 5
Enter group members
If no DSS is attached :
SP: “Entering an Extension”
Û
Delete
Backspace Next
If DSS is attached :
Exit Enter
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is a member of the calling
group.
Off = extension is not a member of the
calling group.
8 Assign or remove the extension from the calling group.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove
extensions from the calling group by
repeating Steps 7 and 8.
9 Continue to assign the extension to another calling group or go to Step 10.
Select
Next Next
9
Return to Step 7 to continue programming. The
next calling group will be displayed on Line 1.
10 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Group Calling Line/Trunk or Pool Assignments
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/PBX only)
that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling
group.
To reassign a line/trunk or pool to a new calling group, you must remove it from
its old group before making the new assignment.