AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 436 / 887

Lines and Trunks
4–64
Programming Procedures
4. If you are copying assignments to a block of lines/trunks and one of the lines
or trunks is in use, you see the message
Trunk Busy - Pls wait
on your
display. The copying for the rest of the lines/trunks in the block is delayed until
the busy line/trunk becomes idle. If you exit without waiting for the copying to
complete, the copying done up to that point is not canceled.
Summary: Copy Options for Lines/Trunks
Programmable by System manager
Mode All (but note differences)
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Form 3c, Incoming Trunks: TIE
Form 3d, Incoming Trunks: DID
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option Not applicable
Console Procedure To copy individual lines/trunks:
LinesTrunks
®
Copy
®
Single
®
Dial copy from trunk no.
®
Enter
®
Dial copy to trunk no.
®
Enter
®
Exit
®
Exit
®
Exit
To copy blocks of lines/trunks:
LinesTrunks
®
Copy
®
Block
®
Dial copy from trunk no.
®
Enter
®
Dial first copy to trunk no. in block
®
Enter
®
Dial
last copy to trunk no. in block
®
Enter
®
Exit
®
Exit
®
Exit
PC Procedure To copy individual lines/trunks:
4
®
7
®
1
®
Type copy to trunk no.
®
0
®
Type
copy from trunk no.
®
0
®
5
®
5
®
5
To copy blocks of lines/trunks:
4
®
7
®
2
®
Type copy from trunk no.
®
Type first
copy to trunk no. in block
®
0
®
5
®
Type last copy to
trunk no. in block
®
0
®
5
®
5
®
5