AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 454 / 887

DS1 Facilities
4–82
Programming Procedures
✱
Disconnect Timing Procedure
Console Display/Instructions Additional Information PC
1 Erase the current disconnect time ( nnnn) .
All S56 Data
Enter Disconnect time
(140-4800)
nnnn
Backspace Next
Exit Enter
Press Drop .
A+P
2 Enter the new disconnect time ( nnnn) = 140 to 4800 ms, in increments of 20 ms ).
Dial or type [ nnnn ].
Û
3 Save your entry.
Select
Enter Enter
.
0
4 Return to the System Programming menu.
Select
Exit Exit
four times.
5555
¤
Dial Mode Procedure
1 Choose an option.
All S56 Data:
Select **mode
** = In or Out
_
Rotary
_
Touch Tone
Next
Select
Rotary
or
1
Exit Enter Touch Tone
2
2 Save your entry.
Select
Enter Enter
.
0
3 Return to the System Programming menu.
Select
Exit Exit
four times.
5555
Switched 56 Dial Plan Routing
Dial plan routing provides a way to route incoming calls received on a Switched
56 Network line. An incoming call is routed by matching the incoming number
and then optionally deleting and/or adding digits to direct the call to a specific
endpoint. The expected digits is the number of incoming digits outpulsed from
the central office.