AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 581 / 887

Auxiliary Equipment
Programming Procedures
4–209
Console Display/Instructions Additional Information PC
3 Select Transfer Return.
VMS/AA:
If you do not want to change the current
Make a selection
setting for number of rings before transfer,
_
TransferRtn
go to Step 7.
TT Duration
TT Interval
Exit
1
4 Erase the current interval setting (
x
).
VMS TransferRtn Invervl:
Enter return interval
(0-9)
x
Backspace
Exit
Enter
Press Drop .
A+P
5 Enter the number of rings before calls are transferred to the backup position
(
n = 0 to 9).
Use 0 to specify that calls are not transferred to
backup position.
Dial or type [ n ].
Û
6 Save your entry.
Select
Enter Enter
.
0
7 Select Touch-Tone Duration.
VMS/AA:
If you do not want to change the current
Make a selection
setting for touch-tone duration, go to
TransferRtn
Step 11.
_
TT Duration
TT Interval
Exit
2
8 Erase the current touch-tone duration setting ( xxx ).
Touch-Tone Duration:
Enter duration length
(50-200 ms, increment 25)
xxx
Backspace
Exit
Enter
Press Drop .
A+P
9 Enter the touch-tone duration in milliseconds ( nnn = 50 to 200).
Dial or type [ nnn ].
Û