AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 109 / 887

Using SPM
Programming with SPM
2–31
6 If converting from Release 1.0 or 1.1, select the CONVERT TO release. To
convert from Release 1.2, 2.0, or 2.1 go to Step 7.
The screen below appears when converting from Release 1.0 or 1.1.
Please enter your
All characters must be entered as they
CONVERT TO release
appear on the screen, including the
and press ENTER.
decimal point.
1.2i 1.4i
2.0 2.1
3.0 4.0/5.0
Enter number:x.x
7 Follow the instructions for a floppy or a hard disk.
■
If the CONVERT TO file will be saved to a floppy disk, go to Step 8.
■
If the CONVERT TO file will be saved to the hard disk, go to Step 9.
8 Use the arrow keys to highlight
GOTO FLOPPY
and press
R
.
Please select file name GOTO FLOPPY
to convert to
,
or select MAKE NEW FILE
NEW FILE to create a new FILENAME.XXX
file on selected drive. FILENAME.YYY
Enter Filename:
After you press
R
, the
GOTO FLOPPY
statement shown above changes to
GOTO HARD DISK
and the directory listing from the root directory of the disk in
Drive A appears. Continue with Step 9.
Please select file name GOTO HARD DISK
to convert to , or select MAKE NEW FILE
NEW FILE to create a new FILENAME.XXX
file on selected drive. FILENAME.YYY
Enter Filename:
Press ESC to abort.
9 Specify a filename for the converted file.
■
Highlight the name of the file you want to convert to, press
R
and go
to Step 11.
■ To enter a different filename, use the arrow keys to select
MAKE NEW FILE
and press
R
.