AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 503 / 887

PRI Facilities
Programming Procedures
4–131
Telephone Number
Use this procedure to assign a string of up to 12 digits to each PRI channel. This
string must match the number sent by the network (that is, the number provided
by the PRI service provider) to indicate the number dialed by an outside caller.
The system uses this number to route the call to the correct destination, which
means that the number assigned to each channel in the same B-channel group
must be unique. Note also that the number cannot be the same as the
associated test telephone number.
Summary: Telephone Number
Programmable by System manager
Mode Hybrid/PBX, Key
Idle Condition Not required
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Factory Setting No digits
Valid Entries Up to 12 digits (any combination of 0 to 9)
Inspect No
Copy Option No
Console Procedure
LinesTrunks
®
PRI
®
PhoneNumber
®
Dial trunk no.
®
Enter
®
Drop
®
Dial telephone no.
®
Enter
®
Exit
®
Exit
PC Procedure
4
®
6
®
1
®
Type trunk no.
®
0
®
A
+
P
®
Type
telephone no.
®
0
®
5
®
5
Procedure: Telephone Number
Console Display/Instructions Additional Information PC
1 Select the Lines and Trunks menu.
System Programming: >
Make a selection
System
Extensions
SysRenumber Options
Operator Tables
_
LinesTrunks AuxEquip
Exit NightSrvce
4